Ads 768x60px

Solar lanterns

Category           :   Energy  (Products )

Brand Name     :   Sun Ray

Specifications  :    Components:   CFL 5W tube, reflector Plate, tube holder, battery, charge socket and switch (On/Off), all placed in a suitable casing module. A 5 mt. Long cable is used to connect the SPV panel placed in sunlight to the lantern inside the house.

Detailed Description     :    Working
 1. The SPV Panel should be mounted on the roof of the house, using clamps provided with the system, where it shall be exposed to sunlight throughout the day.
2. Daily, during daytime, the lantern should be put on charge. The 2-pin connector at the end of the cable from the SPV module should be connected to the socket at the rear of the lantern. Ensure that the green LED glows. It is advisable to keep the light switch in the OFF position during charging.
3. During night time, when the lantern is needed, the connector from SPV module is to be unplugged and the lantern can be carried to the place where it is needed. The lamp can be switched on using the switch. When lamp switches OFF and red lamp glows, the light switch should be put OFF. Uses: It is used for indoor and domestic lighting, for work in remote places during night hours, and as a back up during power failure.

Brief Description        :   
This is lantern shaped illuminating device working on solar photo voltaic energy.

Production Unit          : No’s

 Payment Terms          :  Cash or  Cheque